NDT RT LEVEL II

What is Radiography Testing?
RT involves the use of penetrating gamma- or X-radiation to examine materials and product’s defects and internal features. An X-ray machine or radioactive isotope is used as a source of radiation. Radiation is directed through a part and onto film or other media. The resulting shadowgraph shows the internal features and soundness of the part. Material thickness and density changes are indicated as lighter or darker areas on the film. The darker areas in the radiograph below represent internal voids in the component. . Most materials can be tested by Radiographic inspection, e.g. welds, castings, composites etc. Radiographic testing provides a permanent record and provides a high sensitivity of testing.

What are the Responsibilities of an Individual who is certified to Radiography Level 2?
An individual certified to Radiography Level 2 has demonstrated competence to perform NDT according to Radiography Testing procedures. Within the scope of the competence defined on the certificate, Level 2 personnel may be authorised by the employer to:

Select the Radiography Technique for the Test Method to be Used:
• Define the Limitations of Application of the Testing Method;
• Translate NDT codes, standards, specifications and procedures into NDT instructions adapted to the actual working conditions;
• Set up and verify equipment settings;
• Perform and supervise tests;
• Perform and supervise tests;
• Prepare Ultrasonic written instructions
• Interpret and evaluate results according to applicable standards, codes, specifications or procedures;
• Prepare Radiography written instructions
• Carry out and supervise all tasks at or below level 2;
• Provide guidance for personnel at or below level 2;
• Report the results of Radiography test;

What is RTFI?

The Radiographic Interpretation course only covers the interpretation of the radiograph, therefore is suitable for personnel wishing to only interpret radiographs as opposed to creating radiographs via Radiographic testing.

What are the responsibilities of a individual who is certified to RTFI Level 2?

Radiographic interpreters assess radiographic images of welds to determine the existence, nature and classification of discontinuities. If a discontinuity is present, the radiographic interpreter applies the criteria specified by the code to which the weld must comply in order to ascertain if it is a defect or an acceptable condition.

Course Content

• Introduction to Film • Types of Films • Radiographic Viewing • Radiographic Image Quality • Exposure Techniques • Discontinuities • Radiographic artifacts • Codes, Procedures, and Written Practices

(CONTENTS OF THE TRAINING)

Principles
Orgin of x ray, gamma rays & equipments
Development & film and processing
Radiographic techniques
Formation of image
Safety
Interpretation of radiographs
Codes and standards

PRACTICALS:

Provides 100 hours practical classes on all methods in NDT and QC. (Saturday and Sunday special classes will be scheduled if the students demand).

COURSE DURATION:

Contact office for details

ELIGIBLITY:

SSLC, Higher Secondary / equivalent, VHSE, ITI, DIPLOMA OR Equivalent.
1.General 2.Specific examinations 3. Practical 4.Viva
1. All General Examination will be Objective Type Examinations .
2. Specific Examinations are Objective Exams based on a given reference specific Codes which will be allowed to refer during the examination time.
3. Practical Examinations are held in suitable specimens and record in the respective reports.
4. Viva is conducted as a part of practical examination.

ABOUT CERTIFICATION:

Examinations are CONDUCTED IN BOTH ONLINE AND OFFLINE METHODS.

ADMISSION

For Admission - Click Here

OTHERS:

• For Course Fees kindly contact the office.
• A new batch will be starting in first week of each month.
• All students should bring scientific calculators to the class daily.
• Study materials will be provided in soft and hard copies to the candidates
• Vision certificate should be submitted during the time of Admission.